Deutsch

English


Sealing caps

in permanent and temporary version

Product description permanent sealing caps

The application of permanent sealing caps is sealing of micro duct bundle for long-term storage in underground environment. It is of crucial importance to seal micro ducts even for years i.e. at the end of a line. Often used makeshift such as tapes or shrink caps are here unsuitable materials, because they neither tightly can close the micro duct bundle, nor are sustainable.

 

Our permanent sealing caps foe micro duct bundles with up to 52mm outside diameter prevent the ingress of water and dirt of any kind. Whole bundle of micro ducts is sealed off cost-effectively in one operation. The sealing cap has control pins (patented*) which indicate a correct installation. The integrated sealing compound is distributed in the individual micro ducts when you turn on the cap onto the bundle.

 

Depending on the version, the sealing cap suits for micro duct bundles with or without a central micro duct. For fixation of sealing cap on bundle, either the central micro duct or a micro duct in the middle of the bundle is used. For easy installation the sealing cap has a central thorn with self-tapping thread.

 

If accidentally one micro tube comes under pressure by trying to yet in a cable, the pressure can escape at the cap. The micro tube gets sealed off again by the self-healing effect of the sealing compound.

 

If network construction should be continued further at a later date, the permanent sealing cap will be removed like described in the installation instruction.

 

Permanent sealing caps from Elitex are available for most common micro duct bundles with or without central duct. The product has been proven thousand and on times for safe sealing and fast application.

 

  • permanent sealing caps are dust water and gas proof
  • according to P68 for up to 5m waterhead
  • internal sealing pressure 1,0 bar
  • sap shell made from impact resistant POM
  • simple installation due to with self-tapping thread at central thorn
  • red control pins which indicate a correct installation
  • for long-term storage in underground environment
  • operating temperature from -40° C up to + 60° C

Patented by Elitex GmbH, EP Patent No. 13153451.3 


Product description temporary sealing caps

The application of temporary sealing caps is for short-term storage during installation and construction of micro duct bundle above ground. It is of crucial importance to seal open end of micro ducts during any phase of installation and storage. Often used makeshift such as tapes or shrink caps are here unsuitable materials, because they neither tightly can close the micro duct bundle, nor are sustainable.

 

Our temporary sealing caps foe micro duct bundles with up to 52mm outside diameter prevent the ingress of water and dirt of any kind. Whole bundle of micro ducts is sealed off cost-effectively in one operation. The sealing cap retains its full functionality for up to 5-times reuse, if it was properly cleaned and installed.

 

Depending on the version, the sealing caps suit for micro duct bundles with or without a central micro duct. For fixation of sealing cap on bundle either the central micro duct or a micro duct in the middle of the bundle is used. For easy installation the sealing cap has a central thorn with self-tapping thread. For easy identification of size, the sealing caps are color coded. The temporary sealing caps are not qualified for long term underground storage. For this application permanent sealing caps are available.

 

If network construction should be continued further at a later date, the temporary sealing cap will be removed by just turning it off like a screw

 

Temporary sealing caps from Elitex are available for most common micro duct bundles with or without central duct. The product has been proven thousand and on times for safe sealing and fast application.

 

  • temporary sealing caps are dust water and gas proof according to P68, immersion in water for up to 15 days
  • internal sealing pressure 0,5 bar
  • up to 5 times reusable
  • sap shell made from impact resistant POM
  • UV- and weatherproof
  • simple installation due to with self-tapping thread at central thorn
  • easy identification of size by color coded sealing caps
  • short-term storage above ground
  • operating temperature from -40° C up to + 60° C

Patented by Elitex GmbH, EP Patent No. 13153451.3

 


Application movies

Gallery


Technical datasheets

Download
Technical datasheet sealing cap permanent
TD-sealing cap permanent 1.0.pdf
Adobe Acrobat Dokument 381.9 KB
Download
Technical datasheet sealing cap temporary
TD-sealing cap temporary 1.0.pdf
Adobe Acrobat Dokument 312.3 KB

Installation instruction

Download
Installation Instruction sealing cap permanent
IA-Sealing cap permanent 1.0.pdf
Adobe Acrobat Dokument 1.2 MB
Download
Installation instruction sealing cap temporary
IA-Sealing cap temporary 1.0.pdf
Adobe Acrobat Dokument 918.4 KB


Elitex GmbH

Justus-von-Liebig-Straße 13
D-85247 Schwabhausen

Telefon +49 8138 / 6976853
Fax +49 8138 / 6976854
E-Mail    office@elitex-gmbh.de
www www.elitex-gmbh.de